2005 - 2009 S197 Mustang
Adjustable lower control arms with Delrin Bushings and Heim Joints
A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel plate, deflection is eliminated with A-arms from BMR Suspension. BMR’s AA022 Lower A-arms are equipped with greasable heavy-duty ball joints, greasable Delrin bushings (rear mount) to handle the high loads, and zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends for loads of adjustability. Solid mounts give you a more responsive feel over the stock rubber bushings. BMR’s bushings allow grease to evenly coat the inner sleeve. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. The combination of rod ends and Delrin bushings gives you improved steering feel and responsiveness for any for of driving.
BMR’s AA022 lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The rod ends and Delrin bushings add strength and reduce deflection over the stock rubber bushing. The means you get great performance. Designed for street performance, drag race, and handling, and pro-touring applications, BMR lower A-arms are engineered to give you improved geometry and increased lateral grip during cornering situations.
BMR Suspension AA022 Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.
Control arm hardware kit RH014 (Includes upper and lower control arm hardware - Highly Recommended) also available.
- Adjustable design
- 19mm standard height ball joints
- Eliminates lower A-arm deflection
- Greasable Delrin bushings
- Zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends
- Improves steering feel and response for normal and performance driving
- Laser-cut, CNC-formed plate steel plates
- Fixture welded for precise fit
- Greasable Delrin bushings (rear mount)
- Pre-assembled with new heavy-duty ball joints
- Durable powdercoat finish
- Proudly made in the U.S.A.
***Attention 2010 Mustang Customers***
According to representatives from Ford Motor Company, all 2010 Mustangs built before August 2009 have 18 millimeter ball joints on the front lower A-arms. If your 2010 Mustang was built before August 2009, you need to purchase BMR A-arms for a 2005-2009 Mustang (AA010, AA019, AA023, or AA024).
There should be a manufacturing decal on the driver side door jamb of your Mustang. The date on the upper left hand corner is the build date.
All 2011-2014 have 19 millimeter ball joints on the front lower A-arms. All 2005-2009 Mustangs have 18 millimeter ball joints on the front lower A-arms.
If you are uncertain of the build date for your Mustang, please measure the ball joint stud diameter before ordering your BMR front lower A-arms. If you have any questions, please call BMR Suspension directly and we will help you select the correct A-arms.